Freestyle Libre 1

Για να χρησιμοποιήσετε το Libre ως CGM που παίρνει νέες τιμές BG κάθε 5 λεπτά πρέπει πρώτα να αγοράσετε έναν προσαρμογέα NFC σε Bluetooth όπως:

Additionally it is possible to use a specific watch, the Sony Smartwatch 3 which has an NFC chip which can be enabled and can be used as a NFC collector. However the custom NFC to Bluetooth adapters listed above offer a less complex solution and would be used by the majority of those wanting to use their Libre 1 as a CGM. * Sony Smartwatch 3 (SWR50) https://github.com/pimpimmi/LibreAlarm/wiki/

As it currently stands, if using Libre 1 as BG source you cannot activate ‘Enable SMB always’ and ‘Enable SMB after carbs’ within the SMB algorithm. Οι τιμές BG του Libre 1 δεν είναι αρκετά ομαλές ώστε να το χρησιμοποιείτε με ασφάλεια. Δείτε ” Εξομάλυνση δεδομένων της γλυκόζης του αίματος <../Χρήση/Smoothing-Blood-Glucose-Data-in-xDrip.md>`_ για περισσότερες λεπτομέρειες.

If using xDrip+

  • If not already set up then download xDrip+ and follow instructions on LimiTTEer or Libre Alarm.
  • In xDrip+ go to Settings > Interapp Compatibility > Broadcast Data Locally and select ON.
  • In xDrip+ go to Settings > Interapp Compatibility > Accept Treatments and select OFF.
  • If you want to be able to use AndroidAPS to calibrate then in xDrip+ go to Settings > Interapp Compatibility > Accept Calibrations and select ON. Ενδέχεται επίσης να θέλετε να ελέγξετε τις επιλογές στις Ρυθμίσεις> Λιγότερες κοινές ρυθμίσεις> Ρυθμίσεις βελτιωμένης βαθμονόμησης.
  • Select xDrip+ in ConfigBuilder (setting in AndroidAPS).
  • Για τις ρυθμίσεις στο xDrip + με στιγμιότυπα οθόνης δείτε τη σελίδα ρυθμίσεων xDrip + </ Configuration / xdrip.html> `__. Υπάρχει ένα μέρος για τις βασικές ρυθμίσεις xDrip + και για τις ρυθμίσεις Freestyle Libre xDrip +.

Αν το AAPS δεν λαμβάνει τιμές BG όταν το τηλέφωνο βρίσκεται σε κατάσταση λειτουργίας αεροπλάνου, χρησιμοποιήστε Προσδιορισμός δέκτη όπως περιγράφεται στη[ σελίδα ρυθμίσεων xDrip](../Configuration/xdrip.html).

Εάν χρησιμοποιείτε το Glimp

  • You will need Glimp version 4.15.57 or newer. Older versions are not supported.

Εάν δεν το έχετε ήδη εγκαταστήσει, κάντε λήψη του Glimp και ακολουθήστε τις οδηγίες στο <http://www.nightscout.info/wiki/welcome/nightscout-for-libre>. * Επιλέξτε το Glimp στο Configbuilder (ρύθμιση στο AndroidAPS).